How To Hang Wood Art On Wall

After you slide the artwork on the wall mounted cleats predrill and drive some long wood screws into the sides of the bottom cleat.

How to hang wood art on wall. Wait an hour before replacing the artwork to ensure the strips have had time to properly attach on the wall. Download the Ampersand Specification Sheet with profile widths and depths. The idea without getting too far into the maths is to use the furniture to frame the print then centre the artwork within the white space above the furniture.

Create the frame and then nail the plywood on top. So here were the options we considered. Cradled panels of course can be hung directly on the wall and need no additional framing.

Remove the liners and press the picture against the wall. Once all the 1 circles were cut I added another cut within that circle using a 38 wood boring drill bit. Consider what walls you have.

If hanging more than one picture be sure to use. To the upper cleat attach a 1x1 or 1x2 strip of wood that is 5-12 long so that its flush to the top of the cleat on the artwork. Use a pencil to mark where the screw nail or hook will sit on the wall.

Although I may do this for a future project I liked the idea of. Press the wall strips with your fingers for 30 seconds. This blogger says you should use three strips for large frames and one just at the top for smaller frames to hang art without using a nail or hammer.

How To Hang Art 1. For added stability you might try affixing. It is often preferred to use hooks with two or three thinner nails like these.